1. ST INTRODUCTION
1.1. ST Reference
ST Title: TASKalfa 3500i, TASKalfa 4500i, TASKalfa 5500i Data Security Kit
(E) Overseas Version Security Target
ST Version: Version 0.80
Creation Date: July 7, 2011
Author: KYOCERA MITA Corporation
1.2. TOE Reference
TOE Name: TASKalfa 3500i, TASKalfa 4500i, TASKalfa 5500i, TASKalfa 3500iG,
TASKalfa 4500iG, TASKalfa 5500iG, CS 3500i, CS 4500i, CS 5500i,
CD 1435, CD 1445, CD 1455, DC 2435, DC 2445, DC 2455
Data Security Kit (E)
TOE Version: V1.00E
Manufacturer: KYOCERA MITA Corporation
1.3. TOE Overview
1.3.1 TOE Type
This TOE defined by this ST, includes the firmware that controls the Multi Function
Printer (hereinafter referred to as “MFP”) having mainly copy function, scan function
and print function, and ASIC having the security algorithm function. The TOE is
installed to be used for the MFPs manufactured by KYOCERA MITA Corporation,
namely, “TASKalfa 3500i, TASKalfa 4500i, TASKalfa 5500i, TASKalfa 3500iG, TASKalfa
4500iG, TASKalfa 5500iG, CS 3500i, CS 4500i, CS 5500i, CD 1435, CD 1445, CD
1455, DC 2435, DC 2445, DC 2455”. Major security features of the TOE protect the
image data stored in the internal HDD inside the MFP from being removed through an
unauthorized interface.
1.3.2 Usage and Major Security Features of TOE
The MFP in which this TOE is installed is able to perform coping (duplication), printing
(paper outputting) and network scanning (electronization) of various documents
handled by users. The MFP is located in general office and is not only utilized as a
standalone but also connected to LAN for the use in the network environment. In the
network environment, the MFP is assumed to be used by connecting to client PCs or
server on the internal network protected from unauthorized access on the external
network by firewall. And, the MFP is assumed to be used by connecting to Local Port
To Next Page
Loading...
