Default Setting (System Menu)
9-15
9
Paper Output
Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
NOTE: The optional inner job separator, right job separator, 1,000-sheet finisher, and 4,000-sheet finisher are
required.
When [Heavy 3] (164 g/m
2
- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output
destination, the output destination is automatically changed to a tray that can be used.
FAX RX data output can be specified when the optional fax kit is installed.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to select the output tray.
1 Press the System Menu key.
2 Press [Common Settings] and then [Next] of Paper Output.
3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is installed.
If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit
(Dual FAX).
4 Select the Output Tray.
5 When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press
the Reset key.
Output Tray Descriptions
Inner Tray*
* This cannot be selected when the optional document finisher is installed.
Delivery on the Inner Tray of the machine.
Tray A, Tray B, Tray C Delivery to trays A - C of the optional 4,000-sheet finisher.
Finisher Left Tray
Finisher TOP Tray
Delivery to the left tray or top tray of the optional 1,000-sheet finisher.
Right Tray Delivery to the optional right job separator.
Job Separator Tray* Delivery to the optional inner job separator.
Tray 1 to 7 Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray).
To Next Page
Loading...
