Kyocera TASKalfa 406ci - Page 295

6-49
Using Various Functions > Functions
Sending/Storing
NOTE
This cannot be set when Long Original is set.
Long Original (page 6-67)
Item Value Description
Off
On Stamp Keyboard, Template 1 to 8 Select [ Keyboard ] and enter the text string to be
printed, or select a text stamp from the displayed
templates.
NOTE
Templates that have been set will appear.
For details on registering templates, refer to the
following:
Text (Text Stamp) (page 8-20)
Position Top Left, Top Middle, Top Right,
Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle,
Bottom Right, Detail
Set the stamp position to be printed.
Select [
Position ] and select the text stamp position.
Select [
Detail ] to set the stamp position using
numeric values, and to set the stamp angle.
Font Size Registered font sizes are
displayed. For details on
registering font sizes, refer to the
following:
Font (Text Stamp) (page 8-20)
Set the font size of text stamp.
Character
Border
Off, Circle, Rectangle, Underline Set the character border and underline.
Style None, Bold, Italic, Bold/Italic Set the font style of text stamp.
Font Courier, Letter Gothic Set the font of text stamp.
Color Black, Red, Green, Blue, Cyan,
Magenta, Yellow, White
Set the color of text stamp.
Density 10 to 100%
(in 10% increments)
Set the density of text stamp color.
Set the value by selecting [
+ ] or [ - ].
Display
Pattern
Transparent, Clipping, Overwrite Set the display method of text stamp.
Original Orientation Top Edge on Top,
Top Edge on Left, Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top
edge to scan correct direction. Select [
Original
Orientation ] to choose orientation of the originals,
either [ Top Edge on Top ] or [ Top Edge on Left ].
Then select [
OK ].