Kyocera TASKalfa 420i - U473 Adjusting laser power output; U485 Setting the image processing mode

Copying Functions
4-10 OPERATION GUIDE
Original Orientation
Select the original orientation to use the following functions.
•Zoom (XY Zoom)
•Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Stapling/Punch (optional feature)
* If [On] is selected as the Orientation Confirmation on page 8-15 setting in the System Menu, the selection
screen for original orientation appears when you select any of the above functions.
When placing originals on the platen
When placing originals on the optional document processor
NOTE: To change the default setting for the original orientation, refer to Original Orientation on page 8-15.
Original [Top Edge Top] [Top Edge Left]
Original [Top Edge Top] [Top Edge Left]