Default Setting (System Menu)
OPERATION GUIDE 8-29
8
Sending Settings
The sending settings allow you to specify the following sending function options.
• Quick Setup Registration …8-29
• Destination Check before Send …8-30
• Color Type …8-30
• Entry Check for New Destination …8-31
• Setting the Default Send Screen …8-31
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Quick Setup Registration
Select the sending functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated
to typical functions but can be changed as necessary.
Six items in the following options are available.
Original Size, 2-sided/Book Original, Sending Size, Original Orientation, File Format, Density,
Original Image, Scan Resolution, FAX TX Resolution, Color Selection, Zoom, Continuous Scan
Use the procedure below to register the Quick Setup functions.
1 Press the System Menu key.
2 Press [Send] and [Next] of Quick Setup Registration.
3 Press [Change] of the function to be registered in Quick Setup.
4 Select a key (1-6) allocated on the Quick Setup Registration screen. Press [Off] to delete a key from the
Quick Setup.
5 Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes].
To Next Page
Loading...
