Default Setting (System Menu)
OPERATION GUIDE 8-43
8
Print Density
Adjust print density. Adjustment can be made in 5 levels.
Use the procedure below to adjust the print density.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance].
3 Press [Change] of Print Density.
4 Press [1] - [5] (Lighter-Darker) to adjust density.
5 Press [OK].
Drum Refresh
Refresh the drum when image blur or white spots appear on images in copies.
NOTE: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
To use Drum Refresh, load Ledger or A3 size paper into the Multi Purpose tray.
Use the procedure below to refresh the drum.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance].
3 Press [Next] of Drum Refresh.
4 Press [Execute] to perform Drum Refresh.
5 After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.
To Next Page
Loading...
