Default Setting (System Menu)
8-48 OPERATION GUIDE
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Time Zone.
3 Select the location.
NOTE: Press [ ] or [ ] to select the location.
4 Press [Off] or [On] of Summer Time and press [OK].
NOTE:
If you select a region that does not utilize summer time, the summer time setting screen will not appear.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE: Refer to page 8-15 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Auto Panel Reset.
3 Press [Off] or [On].
4 Press [OK].
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are
between 5 and 495 seconds (every five seconds).
NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear.
Use the procedure below to set the reset time.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer.
To Next Page
Loading...
