2KR/2KS
1-3-63
U240
Method: [FINISHER SOL]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Method: [MAIL BOX]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Method: [BOOKLET]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Completion
Press the stop key with the operation stopped. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Solenoid
FEED IN SOL Paper entry solenoid (PESOL)
REAR DOWN SOL 1 Trailing edge holder solenoid 1 (TEHSOL1)
REAR DOWN SOL 2 Trailing edge holder solenoid 2 (TEHSOL2)
SUB PATH SOL Relief path solenoid (RPSOL)
SUB TRAY R SOL Feedshift solenoid 1 (FSSOL1)
SUB TRAY L SOL Feedshift solenoid 2 (FSSOL2)
BOOKLET SOL Centerfold feedshift solenoid (CFSSOL)
PADDLE SOL Paddle solenoid (PDSOL)
HOLD DOWN SOL Paper holder solenoid (PHSOL)
EJECT SOL Pressure switching solenoid (PSWSOL)
PUNCH SOL Punch pattern solenoid (PPSOL)
Display Motor
CARRY ROLL Mailbox drive motor (MBDM) is turned on at paper conveying
BRANCH ROLL Mailbox drive motor (MBDM) is turned on at feedshift operation
Display Motor
CONV MOTOR Centerfold main motor (CMM)
BLADE MOTOR Blade motor (BLM)
BUNDLE UP MOTOR Centerfold paper conveying belt motor 1 (CPCBM1)
BUNDLE DOWN MOTOR Centerfold paper conveying belt motor 2 (CPCBM2)
WIDTH TEST(A3) Centerfold side registration motor 1/2 (CSRM1/2)
WIDTH TEST(LD) Centerfold side registration motor 1/2 (CSRM1/2)
STAPLE MOTOR Centerfold staple motor (CSTM)
To Next Page
Loading...
