2KR/2KS
1-3-64
U241
Checking the operation of the switches of the finisher
Description
Displays the status of each switch of 3000-sheet document finisher.
Purpose
To check the operation of each switch of 3000-sheet document finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Method: [FINISHER]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in reverse.
Maintenance
item No.
Description
Display Description
FINISHER Checking the switch of the document finisher
MAIL BOX Checking the switch of the mailbox
BOOKLET Checking the switch of the center-folding unit
Display Switches and sensors
FRONT COVER SW Front cover switch (FCSW)
TOP COVER SW Top cover switch (TCSW)
RIGHT COVER SW Sub tray right switch (STRSW)
SET SW Joint switch (JSW)
BOOKLET SW Centerfold set switch (CSSW)
PUNCH TANK SW Punch waste box sensor (PWBS)
TRAY L-LIMIT SW Main tray lower limit detection sensor (MTLLDS)
TRAY U-LIMIT SW Main tray upper limit detection sensor (MTULDS)
TRAY MIDDLE SW Main tray middle position detection sensor (MTMPDS)
PAPER HOLD DOWN SW Paper holder home position sensor (PHHPS)
LOAD DET SW Main tray paper upper surface detection sensor 1,2 (MTPUSDS1,2)
HP SW Paper entry sensor (PES)
EJECT SW 1 Eject switch 1 (ESW1)
EJECT SW 2 Eject switch 2 (ESW2)
EJECT SW 3 Eject switch 3 (ESW3)
STAPLE HP SW 1 Staple home position switch 1 (STHPSW1)
STAPLE HP SW 2 Staple home position switch 2 (STHPSW2)
MIDDLE FEED SW1 Inner tray paper entry sensor 1 (ITPES1)
MIDDLE FEED SW2 Inner tray paper entry sensor 2 (ITPES2)
BUNDLE DET SW 1 Paper detection sensor 1 (PDS1)
BUNDLE DET SW 2 Paper detection sensor 2 (PDS2)
BUNDLE UP HP SW Paper conveying belt home position sensor 1 (PCBHPS1)
BUNDLE DOWN HP SW Paper conveying belt home position sensor 2 (PCBHPS2)
WIDTH HP SW 1 Side registration home position sensor 1 (SRHPS1)
WIDTH HP SW 2 Side registration home position sensor 2 (SRHPS2)
To Next Page
Loading...
