Kyocera TASKalfa 420i - Setting: Adjustment of Center Folding Position

2KR/2KS
1-3-71
U246
Setting: Adjustment of center folding position
1. Select [SADDLE POS ADJ (A4R/LTR)], [SADDLE POS ADJ (B4R/LGR)] or [SADDLE POS ADJ (A3/LD)].
2. Change the setting using the +/- or numeric keys.
When the centerfold position too far right (sample 1), increase the preset value. When the centerfold
position too far left (sample 2), decrease the setting value.
Reference value: within
± 3 mm
Figure 1-3-23
3. Press the start key. The value is set.
Setting: [FINISHER B'-IN]
1. Select the desired cursor position.
2. Change the setting using the +/- or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of center folding position for A4/Letter size -10 to 10 0 0.55 mm
Adjustment of center folding position for B4/Legal size -10 to 10 0 0.55 mm
Adjustment of center folding position for A3/Ledger size -10 to 10 0 0.55 mm
Sample 2
Sample 1
3 mm
3 mm
Center line
Display Description Setting
range
Initial
setting
FRONT Front side registration cursor stop position -4 to +4 0
REAR Rear side registration cursor stop position -4 to +4 0
END Trailing edge registration cursor stop position -4 to +4 0