2KR/2KS
1-3-77
U326
Setting the black line cleaning indication
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the contact glass when scanning from the DP.
Setting
1. Press the start key.
2. Select the item to set. The screen for setting each item is displayed.
Setting: [BLACK LINE MODE]
1. Select ON or OFF.
Initial setting: ON
Setting count value is displayed only if the setting is ON.
2. Press the start key. The setting is set.
Setting: [BLACK LINE COUNT]
1. Change the setting value using the +/- or numeric keys.
When setting is 0, the black line cleaning indication is displayed only if the black line is detected.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
BLACK LINE MODE Black line cleaning guidance ON/OFF setting
BLACK LINE COUNT Setting counts of the cleaning guidance indication
Display Description
ON Displays the cleaning guidance
OFF Not to display the cleaning guidance
Display Description Setting range Initial setting
COUNT *1000 Setting counts of the cleaning guidance
indication ( x 1000 sheets)
0 to 255 8
To Next Page
Loading...
