2KR/2KS
1-3-112
(6) Printer Settings
Emulation
1. Press [Change] of Emulation.
2. Select the desired emulation.
3. Press [OK].
Setting of Alternative Emulation
1. Press [Change] of Emulation, [KPDL(Auto)] and
then [Alt Emulation].
2. Select the desired alternative emulation and then
press [OK].
3. Press [OK].
Setting of KPDL error report
1. Press [Change] of Emulation, [KPDL] or
[KPDL(Auto)] and then [KPDL Error Report].
2. Press [On] or [Off] and then press [OK].
3. Press [OK].
EcoPrint
1. Press [Change] of EcoPrint.
2. Press [Off] or [On].
3. Press [OK].
Override A4/Letter
1. Press [Change] of Override A4/Letter.
2. Press [Off] or [On].
3. Press [OK].
Duplex
1. Press [Change] of Duplex.
2. Press [1-sided], [2-sided Bind LongEdge], or [2-
sided Bind ShortEdge].
3. Press [OK].
Copies
1. Press [Change] of Copies.
2. Press [+],[-] or the numeric keys to set the default
number of copies.
3. Press [OK].
Orientation
1. Press [Change] of Orientation.
2. Press [Portrait] or [Landscape].
3. Press [OK].
Form Feed Timeout
1. Press cursor down key and [Change] of Form Feed
Timeout.
2. Press [+] or [-] to set the Form Feed Timeout.
You can set the timeout delay in seconds.
You cannot use the number keypad to enter this
value.
3. Press [OK].
LF Action
1. Press cursor down key and [Change] of LF Action.
2. Press [LF Only], [LF and CR] or [Ignore LF].
3. Press [OK].
CR Action
1. Press cursor down key and [Change] of CR Action.
2. Press [CR Only], [LF and CR] or [Ignore CR].
3. Press [OK].
Paper Feed Mode
1. Press cursor down key and [Change] of Paper
Feed Mode.
2. Press [Auto] or [Fixed].
3. Press [OK].
(7) Printing Reports/Sending Notice
Printing Reports
1. Press [Next] of Print Report.
2. Press [Print] for the report you want to print. Print-
ing starts.
A confirmation screen appears. Press [Yes].
Send Result Report
1. Press [Next] of Result Report Setting, [Next] of
Send Result Report and then [Change] of E-mail/
Folder.
2. Press [Off], [On], or [Error Only].
3. Press [OK].
To Next Page
Loading...
