EasyManua.ls Logo

Kyocera TASKalfa 420i - Send Error Code; Scan to SMB Error Codes

Kyocera TASKalfa 420i
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2KR/2KS
1-4-62
1-4-6 Send error code
(1) Scan to SMB error codes
Code Display
Remarks
Causes Check procedures/corrective measures
1102 Error: User/Password or
Shared Name/Folder Name
Domain name is not entered. Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Assign disable user/pass-
word.
Enter the correct user name/password.
Assign the user who is not
allowed to access to folder.
Enter correct user name/password.
Check the access limit of destination folder.
Assign disable shared name. Enter the correct shared name.
Check if the prohibited letters below are
used to shared name.
@( )!&#$%^~[ ]`
Host name error. Check if the prohibited letters are used to
shared name.
“&’( )|`;<>
1103 Error: Pathname or File
Name
Domain name is not enter Enter the user name with the form of either
[Domain¥User], [Domain/User] or
[Domain@User].
Connect to the folder which is
not permitted for reference/
writing.
Enter correct user name/password.
Check the access limit of destination folder.
Assign disable folder path. Enter correct folder path.
1105 Error: Not support protocol SMB Protocol is set to OFF. Check ON in the [Scanner]-[SMB] screen in
COMMAND CENTER.
2101 Error: Can not connect Enter the disable host name/
IP address.
Enter the correct host name or IP address.
Assign the wrong port num-
ber.
Enter the correct port number.
Network is not connected. Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
2103 Error: Response wait with
timeout
The server is unable to com-
municate.
Check if the server is operating properly.
2201 Error: Network transfer Error occurs on the network. Check the network connection (cable. net-
work condition within LAN, etc.).
2203 Error: Response wait with
timeout
Response is not returned
from the server above speci-
fied time.
Check the network connection (cable. net-
work condition within LAN, etc.).
9181 Error: Page max count over The number of pages of a
send file exceeded 999
pages.
Set the number of pages as 999 or less.

Table of Contents

Other manuals for Kyocera TASKalfa 420i

Related product manuals