2KR/2KS
1-3-56
U204
Setting the presence or absence of a key card or key counter
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Setting: [KEY-DEVICE]
1. Select the optional counter to be installed.
Initial setting: OFF
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: [MESSAGE]
1. Select the [KEY-DEVICE] or [COIN VENDOR].
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
U206
Setting the presence or absence of the coin vender
Description
Sets the presence or absence of the optional coin vender. Also sets the details for coin vender operation, such
as mode and unit price.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
Maintenance
item No.
Description
Display Description
KEY-DEVICE Sets the presence or absence of the key card or key counter
MESSAGE Sets the message when optional equipment is not installed
Display Description
KEY-CARD The key card is installed
KEY-COUNTER The key counter is installed
OFF Not installed
To Next Page
Loading...
