2LK/2LN/2LM/2LC-2
1-3-57
U070 Adjusting the DP magnification
Description
Adjusts the DP original scanning speed.
Purpose
Make the adjustment if the magnification is incorrect in the auxiliary scanning direction when the
DP is used.
Make the adjustment if the magnification is incorrect in the main scanning direction when the CIS
is used.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.l
*1: Reversed DP only. *2: Dual scan DP only.
Adjustment: [Sub Scan]
1. Change the setting value using the +/- keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
Figure 1-3-12
2. Press the start key. The value is set.
Item No. Description
Display Description
Setting
range
Initial
setting
Change in
value per step
Sub Scan(F) Magnification in the auxiliary
scanning direction of CCD
(first side)
-125 to 125 0 0.02 %
Sub Scan(B)
*1
Magnification in the auxiliary
scanning direction of CCD
(second side)
-125 to 125 0 0.02 %
Main
Scan(CIS)
*2
Magnification in the main scan-
ning direction of CIS
-100 to 100 0 0.02 %
Sub
Scan(CIS)
*2
Magnification in the auxiliary
scanning direction of CIS
-125 to 125 0 0.02 %
Original Copy
example 1
Copy
example 2
To Next Page
Loading...
