2LK/2LN/2LM/2LC
2-4-5
Page length L5 Page length (integer value) 10
L6 Page length (decimal value) 61
Page width L7 Page width (integer value) 8
L8 Page width (decimal value) 11
Duplex mode
N4 0: Off
1: Long edge binding
2: Short edge binding
0
Sleep timer time-out time N5 Value in units of 1 minute (1 to 240) 60
Ecoprint level N6 0: Off
2: On
0
Default emulation mode P1 6: PCL 6
9: KPDL
120V: 9
220-240V: 6
Carriage-return action P2 0: Ignores
1: Carriage-return
2: Carriage-return + linefeed
1
Linefeed action P3 0: Ignores
1: Linefeed
2: Linefeed + carriage-return
1
Automatic emulation switching P4 0: AES disabled
1: AES enabled
120V: 1
220-240V: 0
Alternative emulation
(For KPDL3)
P5 Same as the P1 values except that 9 is
ignored.
6
Automatic emulation switching
trigger
P7 0: Page eject commands
1: None
2: Page eject and prescribe EXIT commands
3: Prescribe EXIT commands
4: Formfeed (^L) commands
6: Prescribe EXIT and formfeed commands
10: Page eject commands; if AES fails,
resolves to KPDL
120V: 11
220-240V: 10
Command recognition character P9 ASCII code of 33 to 126 82 (R)
Default stacker R0 1 (inner tray) 1
Item FRPO Setting values
Factory
setting
To Next Page
Loading...
