Kyocera TASKalfa 5551ci - Paper Jam: BR (Bridge) Part (Electrical)

2L6/2N6/2N5/2N4
1-4-55
(10) Electrical parts that could cause paper jam at the BR (bridge) part
Timing of detection
Corrective Action
Jam code
J490x,J491x,J500x,J501x,J510x,J511x
Related parts
BR conveying motor 1 (BRCM1) Engine PWB (EPWB)
BR conveying motor 2 (BRCM2) BR PWB (BRPWB)
BR conveying sensor 1 (BRCS1)
BR conveying sensor 2 (BRCS2)
BR eject sensor (BRES)
BR feedshift solenoid (BRSOL)
Checking
procedure at the
occurrence of
J49XX
Corrective action at the occurrence of
J49XX
On/Off control signal output connector
(terminal), point of checking connection
1 Items for Initial Checks see page 1-4-29
2
BR conveying sensor 1 (BRCS1) :
Conduct connectivity check, mounting
location check, operation check (U031)
BR PWB YC6-2
3
BR conveying motor 1 (BRCM1) :
Operation check (U030)
BR PWB YC7-1 to 4
4
BR PWB (BRPWB) : Replace
5
Engine PWB : Replace
Checking
procedure at the
occurrence of
J50XX
Corrective action at the occurrence of
J50XX
On/Off control signal output connector
(terminal), point of checking connection
1 Items for Initial Checks see page 1-4-29
2
BR conveying sensor 2 (BRCS2) :
Conduct connectivity check, mounting
location check, operation check (U031)
BR PWB YC4-2
3
BR conveying motor 2 (BRCM2) :
Operation check (U030)
BR PWB YC7-5 to 8
4
BR PWB (BRPWB) : Replace