2L6/2N6/2N5/2N4-4
1-4-62
1-4-3 Self-diagnostic function
(1) Self-diagnostic function
1. This machine is equipped with self-
diagnostic function. When a problem is
detected, the machine stops printing
and display the dialog to retrieve the
relevant information in a log. (Self-diag-
nostic dialog)
* : Be sure not to turn power off until the
dialog has gone off.
* : The logs retrieved can be downloaded
in a flash memory device using U964
mode. (See page 1-3-235)
Figure 1-4-5
2. And then display an error message on
the operation panel. An error message
consists of a message prompting a con-
tact to service personnel and a four-
digit error code indicating the type of
the error.
Figure 1-4-6
To Next Page
Loading...
