9-29
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login Key" [Next]
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Select [Add/Edit].
3 "Display Name" [Change] > Enter the user name to be displayed > [OK]
4 Select "User" [Change].
5 To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
For details on entering characters, refer to the following:
Character Entry Method (page 11-10)
•Select [Name] or [ID] from the "Sort" to sort the account list.
•Select [Search(Name)] or [Search(ID)] to search by account name or account ID.
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000
To Next Page
Loading...
