EasyManua.ls Logo

Kyocera TASKalfa 620 - Page 418

Kyocera TASKalfa 620
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2KN/2KP
2-4-6
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Fuser
section
Lower cleaning roller Replace Every service Replace after feeding 500,000
sheets.
P.1-5-59
Press roller Replace Every service Replace after feeding 500,000
sheets.
P.1-5-60
Press roller separation
claws
Clean Every service Clean with alcohol or a dry cloth.
Cleaning felt Replace Every service Replace after feeding 500,000
sheets.
P.1-5-61
Fuser thermistor Check and
replace
Every service Replace if the film is scraped. P.1-5-65
Fuser heater M/S/L Check and
replace
Every service Replace if it is blackened. P.1-5-66
Heat roller Replace Every service Replace after feeding 500,000
sheets.
P.1-5-70
Heat roller separation
claws
Replace Every service Replace after feeding 500,000
sheets.
P.1-5-71
Heat roller gear Check and
replace
Every service Replace after feeding 500,000
sheets.
P.1-5-70
Fuser joint gear Replace
and grease
Every service When replacing with the new gear,
after cleaning the shaft, apply
grease EM-50L to the gear inside.
P.1-5-70
Fuser eject upper roller Replace Every service Replace after feeding 500,000
sheets.
P.1-5-72
Gear 88 fuser Grease Every service Apply grease EM-50LS.
Guides Clean Every service Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Duplex
section
Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.
Duplex feedshift sole-
noid
Check and
replace
Every service Replace after feeding 500,000
sheets.
Duplex switchback
solenoid
Check and
replace
Every service Run maintenance item U922 to
check and clear the count.
P.1-3-92
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Feedshift
section
Feedshift solenoid Check and
replace
Every service Run maintenance item U922 to
check and clear the count.
P.1-3-92
Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.

Table of Contents

Other manuals for Kyocera TASKalfa 620

Related product manuals