Kyocera TASKalfa 650c - Page 196

4 APPENDIX
194 List Print Format
NETWORK SETTING - NETWORK SERVICE - SMTP SERVER NETWORK SERVICE
Function Description User
ENABLE SMTP SERVER Shows whether the SMTP server is enabled or disabled. NO
PORT NUMBER Shows the port number to be used for receiving Internet
Faxes using the SMTP protocol.
NO
ENABLE OFFRAMP GATEWAY Shows whether the offramp gateway is enabled or
disabled.
NO
ENABLE OFFRAMP SECURITY Shows whether offramp security is enabled or disabled. NO
ENABLE OFFRAMP PRINT Shows whether offramp print is enabled or disabled. NO
E-MAIL ADDRESS Shows the e-mail address of this equipment if the SMTP
server is enabled and it has been set.
NO
NETWORK SETTING - NETWORK SERVICE - POP3 NETWORK SERVICE
Function Description User
ENABLE POP3 CLIENT Shows whether the POP3 client is enabled or disabled. NO
POP3 SERVER ADDRESS Shows the IP address of the POP3 server if it has been
assigned.
NO
AUTHENTICATION Shows whether POP3 authentication is enabled or
disabled.
NO
TYPE POP3 LOGIN Shows the POP3 login type. NO
ACCOUNT NAME Shows the POP3 account name if it has been set. NO
SCAN RATE Shows the scan rate to check the POP3 server for new
messages (in minutes).
NO
PORT NUMBER Shows the port number to be used for accessing the POP3
server.
NO
ENABLE SSL Shows whether the SSL for the POP3 network service is
enabled or disabled.
NO
SSL PORT NUMBER Shows the SSL port number to be used for accessing the
POP3 server.
NO
NETWORK SETTING - NETWORK SERVICE - FTP CLIENT NETWORK SERVICE
Function Description User
DEFAULT PORT NUMBER Shows the default port number to be used for saving a
document to the network folder using FTP.
NO
NETWORK SETTING - NETWORK SERVICE - FTP SERVER NETWORK SERVICE
Function Description User
ENABLE FTP SERVER Shows whether the FTP server service is enabled or
disabled.
NO
DEFAULT PORT NUMBER Shows the default port number to be used for receiving
data using FTP.
NO
ENABLE SSL Shows whether SSL for the FTP network service is enabled
or disabled.
NO
SSL PORT NUMBER Shows the SSL port number to be used for accessing the
FTP server.
NO
NETWORK SETTING - NETWORK SERVICE - SNMP NETWORK SERVICE
Function Description User
ENABLE SNMP V1/V2 Shows whether SNMP is enabled or disabled. NO