Troubleshooting
12-37
12
4 Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5 Close the relay unit cover and push the bridge unit
all the way back in.
6 Close the front cover.
Document Finisher
If a paper jam occurs in the optional document finisher, follow the steps below to remove the jam.
Coupling Section
1 Open the front cover 1.
2 Open conveyor guide (D1) and remove the jammed
paper.
3 Close the conveyor guide (D1) and front cover 1.
To Next Page
Loading...
