Kyocera TASKalfa 8353ci - Page 332

6-45
Using Various Functions > Functions
XY Zoom
XY Zoom
Select vertical and horizontal magnifications individually. Magnifications can be set in 1%
increments between 25% and 400%.
Printing/Sending/Storing
Item Value Description
XY Zoom X: 25 to 400%
(in 1% increments)
Y: 25 to 400%
(in 1% increments)
Select vertical and horizontal
magnifications individually.
Select [+] or [-] to change the
displayed magnifications of "X"
(horizontal) and "Y" (vertical).
Select [# Keys] to use the numeric
keys for entry.
Original
Orientation
Top Edge on Top, Top
Edge on Left, Auto
Select the orientation of the original
document top edge to scan correct
direction.
Select [Original Orientation] to
choose orientation of the originals,
either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
Item Description
100% Reproduces the original size.
Auto Reduces or enlarges original to sending/storing size.
NOTE
• To reduce or enlarge the image, select the paper size, sending size, or storing size.
Paper Selection
(page 6-19)
Sending Size (page 6-79)
Storing Size (page 6-88)
• Some combinations of original size and paper size or sending size may cause the image to be positioned at the
edge of the paper. To center the original vertically and horizontally on the page, use the Centering function.
Margin/Centering, Margin, Centering
(page 6-48)
Y
X