3-21
Sending Faxes > Original Orientation
Original Orientation
To scan the original in the correct orientation, specify which side of the original is the top. To set a 2-sided original,
the orientation of the placed original must be set.
Select original orientation from [Top Edge on Top], [Top Edge on Left].
Long Original
Reads long-sized original documents using a document processor.
(Value: [Off] / [On])
Density
Adjust density.
(Value: [-4] (Lighter) to [+4] (Darker))
Original Image
Select original image type for best results.
Item Image
Top Edge on
Top
Top Edge on
Left
Only a single side of a long original can be scanned.
Originals of up to 915 mm/36-1/32" long can be scanned.
Item Value Description
Text+Photo Best for mixed text and photo documents.
Photo Best for photos taken with a camera.
Text Light
Text/
Fine Line
On
Best for documents that are mostly text and were originally printed
on this machine.
Off Sharply renders pencil text and fine lines.
Text (for OCR) Scanning produces an image that is suitable for OCR.
Original Original orientation
Original Original orientation