Kyocera Taskalfa Pro 15000c - Page 123

3-45
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
3 Go to next step according to result of height and level check.
• Height OK, Level OK: Go to step 22.
• Height OK, Level NG: Go through from step 17 to 19 then jump to step 21.
• Height NG, Level OK: Go to step 17.
• Height NG, Level NG: Go to step 17.
17
Open the front cover [A].
IMPORTANT
• The evenness has to be checked by leveler in the end.
[F]
[E]=[F]OK :
[E]>[F],[E]<[F]NG :
[E]
[A]