3-50
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
<B> Paper Feeder (PF-9100) to Bridge Kit for Main Unit (AK-9110)
Preparation for Bridge Kit for Main Unit (AK-9110)
30
Attach the 2 joint pins [A] on the connecting plate [B].
• Make sure that the main power switch and AC power switch of the main machine are turned OFF and that its
power cord is disconnected before doing the following procedure.
• This is the procedure for installing the paper feeder to the right of the main machine. The procedure for
installing it to the right of the bridge unit AK-9130 is the same as this procedure.
• See Paper Feeder (PF-9100)
for unpacking.
To Next Page
Loading...
