Kyocera Taskalfa Pro 15000c - Page 138

3-60
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
53
Attach the exit motor unit [A] (Screw x3: M4x8).
54
Attach the control board [A] and fan assembly [B] (Screw x4: M4x8).
55
Connect the drawer connector harness [A] and motor harness [B] to the control
board (Connector x4).
NOTE
• Tighten the fan assembly [B] and control board [A] together (blue circle).
1 CN208
2 CN207
3 CN210
4 CN205