3-185
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
<J> 4000 Sheet finisher (DF-9100) to Stacker-Finisher Bridge kit (AK-9120)
Preparation for Stacker-Finisher Bridge kit (AK-9120)
140
Attach connecting plate [A] to AK-9120 (Screw x2: M4x20).
141
Hook up connector [A] of the cable to the connector on AK-9120.
• All tapes and packing materials on the accessories parts have to be removed.
• Main power switch of main unit has to be turned off and power cable has to be unplugged before install
Finisher (DF-9100).
• Finisher has to installed first for the folding Unit (BF-9110) and/or punch unit (PH-7A/7C/7D) installation.
• See 4000 Sheet Finisher (DF-9100)
for unpacking.
To Next Page
Loading...
