Kyocera Taskalfa Pro 15000c - Page 290

3-212
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
3
Put the punch guide [A] as the tip [B] goes under the frame [C] of DF-9100.
4
Insert punch unit {A] into DF-9100.
IMPORTANT
Hold up the unit slightly while inserting punch unit [A] in step 4. Pay attention that installing punch unit with
downward gets the hook in bottom of the unit broken.
[A]
[B]
[C]
[A]
[A]
[B]
[C]
[A]
[A]
[B]