Kyocera Taskalfa Pro 15000c - Page 291

3-213
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
5
Hold up punch unit [A] and insert shaft [C] of motor unit [B] to hole [D] of punch unit
[A]. Hang the hook [E] of motor unit [B] onto the groove [F] in DF-9100
6
Secure motor unit [A] (Screw x2: M3x8).
7
Put stop ring [B] onto shaft [A] of motor unit. Hook the spring [C] between punch unit
and motor unit.
[A]
[B]
[C]
[D]
[B]
[B]
[F]
[E]
[A]
[A]
[B]
[C]