Kyocera Taskalfa Pro 15000c - Page 341

6-11
Machine transportation after setup > Procedure for the main unit transportation (floor to floor)
[CONFIDENTIAL]
13
Close the front left lower cover [A].
14
Connect the power cable [C] to main unit [A].
15
Open the front right lower cover [B] and turn the main switch [D] on, then close the
front left lower cover [B].
16
Turn the power switch [A] on where is located at the front side of the main unit.
[A]
[C]
[D]
[B]
[A]
[A]