6-67
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
U755: Conveying CIS print position adjustment (In case of BK head replacement)
1
Go into U755 Adj Conv CIS.
2
Select [Center Pos Adj].
3
Set A4/LTR in reduction on upper cassette 1.
4
Select [Print] key to output adjustment chart.
5
Place back the printed chart in cassette and print on back side.
6
Press [Start] key.
7
Find the leftmost point on scale line that cross with horizontal line and read value by
scale line as V value.
8
Find the closest position of line on face and back on the chart as H value.
To Next Page
Loading...
