4-51
Troubleshooting > Troubleshooting When Feeding Paper
4 Enter the value> [Start] key > [Stop] key.
3
Check paper creasing
Paper get creased.
1 [Home] key > [...] > [Professional Settings] > [246 Adjust Finisher] > [03 DE] > [01 Paper
Loop1] or [02 Paper Loop2]
2 Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
3 Press the [Start] key > [Stop] key.
Heavy 5 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Heavy 6 0.0 to 6.0 1.0 0.5 -6.0 to 6.0 0.0 0.5
Item Description Range Default
Amount of
change
01 Paper Loop1 Adjust the paper loop when
printing on single side (odd
page pass).
-10 to 10 - 1 mm
02 Paper Loop2 Adjust the paper loop when
printing on double side (even
page pass).
-10 to 10 - 1 mm
Item Simplex(DE) Duplex(DE)
Range Default Amount of change Range Default Amount of change
To Next Page
Loading...
