Kyocera Taskalfa Pro 15000c - The Edge of a Stack Papers Is Misaligned

4-61
Troubleshooting > Troubleshooting When Discharging Paper
If the second sheet is out of position, adjust10 Save Drum(3rd C)].
3
Press the [Start] key > [Stop] key.
Remedy 2: Adjust the paper pull-in timing for the 3rd and the 4th and subsequent sheets
If there is a gap in the pull-in timing of the sheets up to the 2nd sheets, adjust pull amount.
1
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [Finisher] > [13 Pull Amount]
2
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
3
Press the [Start] key > [Stop] key.
The edge of a stack papers is misaligned
1
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [04 Stacker1] or [05 Stacker2]
2
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
Item Range Default Amount of change
09 Save Drum(2nd F) -15 to 15 0 0.15 mm
10 Save Drum(3rd C) -15 to 15 0 0.15 mm
11 Save Drum(2nd C) -15 to 15 0 0.15 mm
Item Range Default Amount of change
13 Pull Amount 0 to 30 0 2 msec
Item Description Range Default Amount of change
Jogger(A3) Adjust the alignment position of
A3 paper.
-30 to +30 0 0.1 mm
Jogger(B4) Adjust the alignment position of
B4 paper.
-30 to +30 0 0.1 mm
Jogger(A4R) Adjust the alignment position of
A4R paper.
-30 to +30 0 0.1 mm
Jogger(A4E) Adjust the alignment position of
A4E paper.
-30 to +30 0 0.1 mm
Jogger(A5R) Adjust the alignment position of
A5R paper.
-30 to +30 0 0.1 mm