2-9
Daily Management and Maintenance > Improving and maintaining of print quality
14
If the diagonal line that intersects the V vertical line of the
chart remains unbroken, enter its maximum value into "01
Chart V".
15
Look through the chart, and enter the number of position
where the H lines on the front and back side coincide in "02
Chart H".
16
[Start] key > [Stop] key
17
[Print] > [Start] key
The front side chart is printed.
18
Set the chart printed in step 17 to cassette 1 as in step 12 >
[Start] key
The rear side chart is printed.
To Next Page
Loading...
