Kyocera Taskalfa Pro 15000c - Parts Cleaning; Cassette Feed Unit

3-2
Maintenance > Parts Cleaning
Parts Cleaning
To maintain the performance of the machine and options, clean the parts when the usage counter (maintenance
counter) for each part reaches 300,000 images.
Professional user can clean the following parts:
• Cassette Feed Unit
• Deck Feed Unit
• Vertical Conveying Unit
You can check the maintenance counter in the following steps.
1
[Home] key > [...] > [Professional Settings] > [U251 Clear
Maintenance Counter].
2
Check the maintenance counter for each part > [Stop] key.
Cassette Feed Unit
This subsection describes the steps for parts cleaning of cassette 1 as an example.
1
Open the Front Cover 2.
IMPORTANT
Do not select [Clear] unless you have replaced each part.
CAUTION
Before cleaning the parts, confirm that the main power switch of this machine is turned off.
IMPORTANT
When cleaning the cassette feed unit, prepare the following.
• Kim towel white or BEMCOT
• Designated deionized water