6-16
Using Custom Paper > Setting from the Operation Panel
Adjusting Color Drift
To feed paper, the speeds of the resistance motors before and after the feeding unit and the speed of the drying belt
motor must made to match, using the speed of the main unit feeding belt as a reference. Adjust this setting if there is
color drift in only the leading edge or trailing edge of the paper.
1
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette Settings"
[Cassette 1 (to 8) Settings] > [Manual]
2
"Adjustment Items" [Print Chart/Help] > [Print]
A test chart is printed.
Chart Example
3
Measure the correction value for the leading edge of the paper.
Check scale "MS1", and find the value of the location where the black lines and red lines align.
In the example below, the lines align at -1, so "-1" is the correction value.
To Next Page
Loading...
