Kyocera Taskalfa Pro 15000c - Loading Paper in the Cassette 3 and 4

7-21
Paper Handling > Loading Paper
6
Gently push Cassette 1 back in.
7
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > [Cassette 1 Settings]
8
Configure the function.
Select the paper size and type.
9
Set by using the printer driver on the PC.
Select the paper size and type using the printer driver on the PC.
Loading Paper in the Cassette 3 and 4
Load the paper in Cassette 3 and Cassette 4. The procedures here represent the Cassette 4.
1
Pull the cassette completely out of the machine.
Cassette 1 (to 8) Settings (page 15-13)
NOTE
Paper size can be automatically detected and selected, refer to the following.
Paper Selection (page 13-4)
Cassette 1 (to 8) Settings (page 15-13)
Printing on Standard Sized Paper (page 9-4)
Printing on Non-standard Sized Paper (page 9-6)