Kyocera Taskalfa Pro 15000c - Loading Paper in the Multipurpose Tray

7-24
Paper Handling > Loading Paper
Loading Paper in the Multipurpose Tray
For details of the supported paper sizes, refer to the following:
Precautions of Special Paper (page 7-12)
For the paper type setting, refer to the following:
Paper Feed Settings (page 15-19)
Be sure to use the multipurpose tray when you print on any special paper.
The capacity of the multipurpose tray is as follows.
• A4 or smaller plain paper (80 g/m
2
): 150 sheets
• A4 or larger plain paper (80 g/m
2
): 50 sheets
• Thick paper (300 g/m
2
): 10 sheets
• Thick paper (209 g/m
2
): 10 sheets
• Thick paper (200 g/m
2
): 10 sheets
• Thick paper (163 g/m
2
): 50 sheets
• Thick paper (157 g/m
2
): 50 sheets
• Thick paper (104.7 g/m
2
): 50 sheets
• Inkjet paper: 10 sheets
• Inkjet matte paper: 10 sheets
• Banner paper: 470.1 mm (18.51") to a maximum of 1220.0 mm (48"): 1 sheet (manual feed), 10 sheets (when
optional banner tray is attached)
• Index tab dividers: 15 sheets
IMPORTANT
If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of the
paper you are using.
NOTE
• When you load custom size paper, enter the paper size by referring to the following:
Paper Feeding (page 15-12)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
MP Tray Settings (page 15-16)
• Paper size can be automatically detected and selected, refer to the following:
Paper Selection (page 13-4)
MP Tray Settings (page 15-16)