10-5
Copying > Copying
Color/Image Quality
Configure the settings
for density, quality of
copies, and color
balance.
Density Adjust density. page 13-11
Original Image Select original image type for best results. page 13-11
Color Selection Select the color mode setting. page 13-12
EcoPrint EcoPrint saves ink when printing. page 13-13
Hue Adjustment Adjust the color (hue) of images. page 13-14
Sharpness Adjusts the sharpness of image outlines. page 13-15
Background
Density Adj.
(Background
Density
Adjustment)
Removes dark background from originals, such
as newspapers.
page 13-16
Saturation Adjust the color saturation of the image. page 13-16
Prevent Bleed-thru Hides background colors and image bleed-
through when scanning thin original.
page 13-17
Contrast You can adjust the contrast between light and
dark areas of the image.
page 13-15
Trapping Remove hollow spaces in text and on images. page 13-17
Advanced Setup
Configure the settings
for continuous
scanning, mirror
image copies, and
Skip Blank Page
function.
Continuous Scan Scans a large number of originals in separate
batches and then produce as one job.
page 13-44
Auto Image
Rotation
When original and paper source size are the
same, but their orientation is different, rotate
image 90 degrees when copying.
page 13-44
Job Finish Notice Sends E-mail notice when a job is complete. It is
also available that send a notice when a job is
interrupted.
page 13-45
File Name Entry Adds a file name. page 13-45
Priority Override Suspends the current job and gives a new job top
priority.
page 13-46
Repeat Copy Enables additional copies in the desired quantity
as necessary after a copy job is completed.
page 13-46
DP Read Action When the document processor is used, select
the scanning operation for the document
processor.
page 13-47
Skip Blank Page When there are blank pages in a scanned
document, this function skips the blank pages
and prints only pages that are not blank.
page 13-47
Global Navigation Function Description
Reference
page
To Next Page
Loading...
