11-10
Scanning > Sending Document to Folder on an FTP Server (Scan to FTP)
5
Check the status.
1 Check the information.
Change the delay as required.
2 Select [Connection Test] to check the connection.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the Address Book by selecting [Add to Address Book].
6
Select [OK].
Destinations can be changed later.
Checking and Editing Destinations (page 4-18)
7
Select the functions.
Select the Global Navigation to display other functions.
Send (page 11-4)
8
Press the [Start] key.
Sending starts.
Folder Path Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
When the FTP server is based on Linux/UNIX, the path including the
sub-folder is combined by the slash "/" not using the back-slash.
Login User Name FTP server login user name
Login Password FTP server login password
(Case sensitive.)
Item Descriptions
To Next Page
Loading...
