Kyocera Taskalfa Pro 15000c - Deleting Custom Box; Storing Documents to a Custom Box; Printing Documents in Custom Box

12-9
Box Function > Using Document Boxes
Deleting Custom Box
1
Display the screen.
[Home] key > [Custom Box] > [Add/Edit]
2
Delete the custom box.
Select the box > [Delete] > [Delete]
Storing Documents to a Custom Box
Custom box stores the print data which is sent from a PC. For the operation of the printing from the PC, refer to the
following:
Printer Driver User Guide
Printing Documents in Custom Box
1
Display the screen.
1 [Home] key > [Custom Box]
2 Select the box containing the document you want to print.
3 Select [Open].
2
Print the document.
1 Select the document in the list that you want to print by selecting the checkbox.
The document is marked with a checkmark.
2 Select [Print].
3 Set the paper selection, duplex printing, etc., as desired.
For the features that can be selected, refer to the following:
Custom Box (Printing) (page 12-10)
If a document stored from a computer is selected, the print settings selection screen appears.
To use the settings used at the time of printing (when the document was saved), select [Print As Is].
Select [Start Print] to start printing.
If you select a document saved in Custom Box of the machine or use the settings saved with the
document, select Print after Change Settings (Do Not Use File Settings)].
To change the print settings, select [Print after Change Settings (Use File Settings)].
4 Press the [Start] key.
Printing of the selected document begins.
NOTE
If a custom box is protected by a password, enter the correct password.
NOTE
To deselect, select the checkbox again and remove the checkmark.