12-14
Box Function > Using Document Boxes
Sending Documents in Custom Box
1
Display the screen.
[Home] key > [Custom Box] > Select the box
2
Send the document.
1 Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.
2 Select [Send].
3 Set the destination.
For more information on selecting destinations, refer to the following:
Specifying Destination (page 4-15)
4 Set the sending size, original image, etc., as desired.
For the features that can be set, refer to the following:
5 Press the [Start] key.
Sending of the selected document begins.
If a custom box is protected by a password, enter the correct password.
• You cannot select and send multiple documents.
• To deselect, select the checkbox again and remove the checkmark.
Depending on the settings, the address book screen may appear.
Custom Box (Storing) (page 12-12)
To Next Page
Loading...
