Kyocera Taskalfa Pro 15000c - Page 338

13-30
Using Various Functions > About Functions
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, select [Finish Scan] to start copying.
Printing
Print a document to 1-sided or 2-sided sheets.
2-sided >>
1-sided
Original Left/Right, Top Select the binding orientation of originals.
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
2-sided >>
2-sided
Original Left/Right, Top Select the binding direction of originals.
Finishing Left/Right, Top Select the binding orientation of copies.
Original
Orientation
Top Edge on Top, Top Edge on
Left, Auto
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Book >>
1-sided
Original Left, Right Select the binding direction of originals.
NOTE
[Top Edge on Top] is set for "Original
Orientation".
Book >>
2-sided
Original Left, Right Select the binding direction of originals.
NOTE
[Top Edge on Top] is set for "Original
Orientation".
Finishing Book>>2-sided, Book>>Book Select the desired Duplex option.
Item Value Description
1-sided ― Disables the function.
2-sided Finishing Left/Right Prints a 2-sided document so that the
sheets are aligned properly for binding on
the left or right.
Top Prints a 2-sided document so that the
sheets are aligned properly for binding on
the top.
Item Value Description