Kyocera Taskalfa Pro 15000c - Job Finish Notice; File Name Entry

13-45
Using Various Functions > About Functions
Job Finish Notice
Sends E-mail notice when a job is complete. It is also available that send a notice when a job is interrupted.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
File Name Entry
Adds a file name.
Additional information such as job number and date and time can also be set. You can check a job history or job status
using the file name, date and time, or job number specified here.
Enter the file name (up to 32 characters
), and select [OK].
To add date and time, select [Date and Time]. To add job number, select [Job No.]. The added information will be
displayed in "Additional Info".
Advanced
Setup
Advanced
Setup
Functions Functions
NOTE
• PC should be configured in advance so that E-mail can be used.
Command Center RX (page 3-45)
• E-mail can be sent to a single destination.
Item Description
Off
Address Book Select the notification destination from the address book.
Address Book Select the notification destination on the address book screen, then select [OK].
[]
(information
icon)
Information on the selected destination can be viewed.
Notify when
interrupted
Select [On] if you require an e-mail notification when a job is interrupted.
Direct Entry Enter E-mail address directly (up to 256 characters), and select [OK].
Notify when
interrupted
Add a check mark if you require an e-mail notification when a job is interrupted.
Advanced
Setup
Advanced
Setup
Functions
Copy
Send
Custom
Box
USB
Memory
Copy
Send
Custom
Box