13-57
Using Various Functions > Assigning Functions to Function Keys
Assigning Functions to Function Keys
Function keys are keys to which various functions and extended functions, including copy and scan, can be assigned.
Frequently used functions and extended functions can be assigned and the screen can easily be displayed.
For this machine, the following functions are pre-assigned; however, alternative functions can be registered by
re-assigning these functions.
•[F1] (Function key 1): Copy
•[F2] (Function key 2): Send
•[F3] (Function key 3): Custom box
1
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Function Key Assignment]
2
Configure the settings.
1 Select the function key to be set.
2 Select the function to be assigned.
3 Select [OK].
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. The factory default login user name and login password are both
set as 15000.
Function Description Reference page
None No function has been assigned. —
Copy Displays the Copy screen. page 10-2
Send Displays the Send screen. page 11-2
Custom Box Displays the Custom Box screen. page 12-2
Job Box Displays the Job Box screen. page 9-19
USB Drive Displays the USB Drive screen. page 12-21
Internet Browser Displays the Internet Browser screen. page 4-19
Extended Function
Name
Displays the selected extended function. —
To Next Page
Loading...
