Kyocera Taskalfa Pro 15000c - Page 428

15-49
Setting up from System Menu > Network Settings
Item Description
IPv6 Settings Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/
IP] is [On].
IPv6 Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the
network.
Manual Setting Manually specify the IP address, prefix length, and gateway address of TCP/IP
(IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of
four-digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when [IPv6] is set to [On].
• To enter "Default Gateway", set [RA (Stateless)] to [Off].
RA (Stateless) Select whether to use RA (Stateless).
Value: Off, On
NOTE
• This function is displayed when [IPv6] is set to [On].
• Selecting [On] displays IP address in [IP Address 1 (to 5) (Stateless)] after
restarting the network.
DHCP Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
• This function is displayed when [IPv6] is set to [On].
• Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the
network.
DNS Server Address Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use the following DNS Server
NOTE
When [Use the following DNS Server] is selected, you can enter static DNS server
information in the [DNS Server (Primary)] and [DNS Server (Secondary)].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.