Kyocera Taskalfa Pro 15000c - Page 430

15-51
Setting up from System Menu > Network Settings
IPP over SSL Protocol
Settings
To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is
443.
The setting will be changed after restarting the device or network.
Value: Off, On
NOTE
• When selecting [On], it also requires a certificate for SSL. the default
certificate is the self-certificate of the machine.
• Set "SSL" to [On] in Security Settings.
SSL (page 15-65)
HTTP Protocol
Settings
Select whether to communicate using HTTP.
The setting will be changed after restarting the device or network.
Value: Off, On
HTTPS Protocol
Settings
Select whether to communicate using HTTPS.
The setting will be changed after restarting the device or network.
Value: Off, On
NOTE
Set "SSL" to [On] in Security Settings.
SSL (page 15-65)
LDAP Select whether to use LDAP.
Value: Off, On
SNMPv1/v2c Protocol
Settings
Select whether to communicate using SNMP.
The setting will be changed after restarting the device or network.
Value: Off, On
SNMPv3 Protocol
Settings
Select whether to communicate using SNMPv3.
The setting will be changed after restarting the device or network.
Value: Off, On
eSCL Protocol
Settings
Selects whether to receive scanned documents using eSCL.
The setting will be changed after restarting the device or network.
Value: Off, On
eSCL over SSL Protocol
Settings
Selects whether to receive scanned documents using eSCL over SSL.
The setting will be changed after restarting the device or network.
Value: Off, On
NOTE
Set "SSL" to [On] in Security Settings.
SSL (page 15-65)
Item Description