2-17
Machine Overview > Overview of Optional Equipments
Paper Finishing Options
No. Name Model Number Description
1
Inverter and Decurler Unit DE-9100 Flattens curling that occurs in printed materials,
enabling you to output printed materials in the
optimum state. This is installed on the 4,000-
sheet Finisher or 5,000-sheet Stacker.
2
5,000-sheet Stacker ST-9100 Holds up to 5,000 sheets of paper, and sort
multiple copies of output into sets and offset each
set. Up to two stackers can be connected.
3
4,000-sheet Finisher DF-9100 This is a large-capacity 4,000-sheet Finisher that
can hold large print runs, and sort multiple copies
of output into sets and offset each set. The sorted
sets of output can be stapled or punched (when
the PH-7A, PH-7C or PH-7D is installed)
4 Paper Output Tray for Banner PT-9100
This can hold banner paper from 700.1 to 1,220 mm
in length. Paper of length up to 700 mm can be
output continuously. Paper of length greater than
700.1 mm can be output one sheet at a time. To use
Banner Guide 10 and Banner Guide 11, install on
the 4,000-sheet Finisher.
To Next Page
Loading...
