3-16
Installing and Setting up the Machine > Installing Software
4
Install the software.
Select the model name of the machine. You can also select [Use host name as port name]
and set to use the host name of the standard TCP/IP port. (A USB connection cannot be
used.)
When you click [Install], a screen asking for your cooperation with data collection will be
displayed. Select one of the answer choices and click [OK].
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and that it
is turned on and click (Reload).
• If the Windows security window appears, click [Install this driver software anyway].
• To install Status Monitor on Windows versions preceding Windows 8, it is necessary to
install Microsoft .NET Framework 4.0 beforehand.
To Next Page
Loading...
